? coilcraft, inc. 2010 specifications subject to change without notice. please check our website for latest information. usb 3.0 common mode choke C 0603 document 406-1 document 406-1 revised 07/20/10 common mode common mode impedance typ (ohms) attenuation typ (db) inductance 2 dcr max 3 isolation i rms 4 part number 1 100 mhz 500 mhz 1 ghz 100 mhz 500 mhz 1 ghz min (nh) (ohms) (vrms) (ma) 0603usb-251ml_ 25 44 64 1.31 3.16 8.45 18 0.077 250 500 0603usb-601ml_ 60 99 142 3.00 6.88 13.27 37 0.109 250 500 0603usb-951ml_ 95 156 234 4.62 9.75 16.06 63 0.142 250 500 0603usb-142ml_ 145 242 353 6.85 12.80 18.16 98 0.174 250 500 0603usb-222ml_ 225 384 592 9.14 16.53 20.29 150 0.209 250 500 1. when ordering, please specify packaging code: 0603usb-222ml c packaging: c =7 machine-ready reel. eia-481 embossed plastic tape (2000 parts per full reel). b = less than full reel. in tape, but not machine ready. to have a leader and trailer added ($25 charge), use code letter c instead. d =13 machine-ready reel. eia-481 embossed plastic tape (7500 parts per full reel). 2. inductance measured at 100 mhz using an agilent/hp 4286a impedance analyzer and a coilcraft smd-a fixture. 3. dcr is specified per winding. 4. current per winding that causes a 20c rise from 25c ambient. 5. electrical specifications at 25c. 0.042 1,07 0.004 0,10 0.030 0,76 0.003 0,076 0.010 0,25 0.023 0,58 0.034 0,86 0.030 0,73 0.013 0,33 0.012 0,30 0.010 0,25 0.004 0,10 recommended land pattern 0.060 0.003 1,52 0,076 1 1 2 2 4 4 3 3 3 4 2 1 optimized for usb 3.0 and hdmi core material ferrite terminations rohs compliant gold over nickel over silver- palladium-glass frit ambient temperature ?40c to +85c with i rms current, +85c to +105c with derated current storage temperature component: ?40c to +105c. packaging: ?40c to +80c resistance to soldering heat max three 40 second reflows at +260c, parts cooled to room temperature between cycles moisture sensitivity level (msl) 1 (unlimited floor life at <30c / 85% relative humidity) failures in time (fit) / mean time between failures (mtbf) 38 per billion hours / 26,315,789 hours, calculated per telcordia sr-332 pcb washing only pure water or alcohol recommended ? designed for high-speed usb 3.0, hdmi, sata, ieee1394 and lvds applications. ? supports data rates up to 4.8 gbit/s. ? miniature eia 0603 footprint; only 1.07 mm tall ? most values provide >15 db common mode attenuation and >100 ohms impedance. dimensions are in inches mm weight 4.9 ? 5.2 mg packaging 2000/7 reel;7500/13 reel; plastic tape: 8 mm wide, 0.23 mm thick, 4 mm pocket spacing, 1.14 mm pocket depth
? coilcraft, inc. 2010 usb 3.0 common mode filter 0603 specifications subject to change without notice. please check our website for latest information. document 406-2 document 406-2 revised 07/20/10 typical differential mode attenuation (ref: 50 ohms) typical impedance vs frequency typical common mode attenuation (ref: 50 ohms) attenuation (db) 1 2 3 4 5 6 0 1 10 100 1000 10000 frequency (mhz) attenuation (db) 0 5 10 15 20 25 30 1 10 100 1000 10000 frequency (mhz) 1 10 100 1000 10000 frequency (mhz) 100 1000 10 1 0.1 impedance (ohms) -222 -142 -251 -951 -601 -222 -142 -251 -951 -601 -251 -601 -951 -142 -222
|
